|
Screw Clamp
|
|
Spring Tubing Clamp - 2 Sizes
|
|
Tubing Clamp
|
|
Swing Jaw™ Tubing Clamp - 3 Sizes
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
This tubing clamp offers on/off and fine control so accurately that it replaces stopcocks in many applications. It may be put in place without disconnecting
|
Perfect for all flexible tubing, this positive-action, self-closing clamp opens by squeezing the handles together. Made of chemical and stain-resistant Delrin® plastic and stainless steel.
|
Strong acetal plastic clamp with serrated jaws provides secure closure on tubing with a wall of .82 mm (1/32 ") or thinner. The open clamp slides over
|
Strong, simple, and safe to use clamps that can be installed and removed without disconnecting tubing. Zinc-plated steel provides a non-slip closure
|
|
|
|
Screw-Clamp Compressor
|
|
Tubing Mini Clamp
|
|
Tubing Mid Range
|
|
Tubing Maxi Clamp
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Strong, open-jaw type nylon tubing clamp accepts any tubing up to 6.4mm (1/4") O.D. Angled jaws prevent tube from slipping out.
|
Mini Clamp: Single position on/off clamp gives positive shut-off with fingertip control. Use for thin-wall tubing under 4.7mm(3/16") O.D.
|
15-position stepped adjustment controls flow from full open to complete closure. Fits tubing from 3.2 to 11mm (1/8 to 7/16") O.D.
|
Maxi Clamp: For up to 19mm (3/4") O.D., this clamp has a 12-position ratchet control from full open to complete closure.
|
|
|
|
Klik Klip™ Wire and Tubing Clip
|
|
Economy Support Stand, Polycarbonate
|
|
Support Stands - 2 Types
|
|
Polypropylene Burette Clamps - 2 Types
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
These individual clips neatly hold computer wires and tubing such as flexible vinyl, rubber, silicone, latex, polyurethane or Teflon® used in pump
|
A sturdy and stable molded polycarbonate base supports a 46 cm (18") tall stainless steel support rod. Two hex nuts secure the 7.9 mm (5/16") diameter
|
Excellent for use in severe corrosive conditions, these stands have no exposed metal parts - all surfaces are polypropylene. Measuring 20 x 30cm
|
These non-corroding, polypropylene burette clamps do not obscure graduations. Burette is held firmly in place by rubber pads and
|
|
|
|
Burette Clamp - Spring Action
|
|
Bosshead
|
|
Funnel Holders - 2 Types
|
|
Multiple Chomatography Column Holders
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Spring-action opening clamp with a flat wing-head screw for tightening. The stainless steel jaws are covered with rubber tubing and have an opening range of 0 to 25mm (1"). Overall clamp length is 22cm (9").
|
This open sided stainless steel bosshead accepts rods up to 13mm (1/2") diameter. Rods are held at right angles to one another with flat wing head clamping screws.
|
Non-corrosive high density polyethylene funnel holder and clamp includes two bushings for 12.5mm (1/2") or 9.5mm (3/8") diameter support rod. Outer ring
|
Flexible loops on a rigid plastic back securely hold up to eight chromatography columns up to 30mm (13/16") in diameter. Columns are held in or
|
|
|
|
Flexible Arm with Weighted Base
|
|
Flexible Gooseneck Arm
|
|
Electrode Holder
|
|
PiRack™ Pipettor Holder System - 4 Types
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Ideal for use with pH meters. The 23 x 16cm (9 x 6") base weighs 1.5kg (3.3lbs) and has rod holding wells with thumbscrews at the center of each edge. (Electrode Holder sold separately.)
|
This Flexible Arm has molded acetal copolymer links with ball-and-socket joints. One end is designed to accept the Electrode Holder while the other has a 12.7mm
|
The Electrode Holder snaps onto the end of the Flexible Arm affording 3 stepped wells for holding an electrode, a reference electrode and an ATC probe. The center
|
The sturdy PiRack™ Clamp-On Pipettor Holder supports many standard brands of pipettors and keeps them safe and within easy reach. Simply attach to any shelf 28mm
|
|
|
|
Universal Implement Stand
|
|
|
|
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
This item falls into the handy gadget category. Just put it on the lab bench or desk and it is ready to hold pipettes, stirring rods, burettes, thermometers, pencils,
|
|
|
