|
Spindrive® Orbital Shaker Platform
|
|
Spindrive® Orbital Vibrating Platform
|
|
0C Cyro-Safe Maxi Cooler (24.3x15.7x14.6cm)
|
|
Spindrive® Microtiter Plate Holder
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
This low profile orbital shaker platform is driven by your magnetic stirrer. By placing the unique Spindrive® Orbital Shaker Platform on top of your standard magnetic stirrer, it becomes an inexpensive orbital shaker. Speed adjustment is
|
Mix up to four microtiter plates or two culture flasks. Design and dimensions are the same as the Orbital Shaker platform but with a smaller orbiting diameter of 1.52mm (.06") making it primarily a vibrating platform. Maximum load is 1.36 kg (3 lb).
|
Bench top sized cooler holds thirty-two 1.5 ml microcentrifuge tubes at a temperature below 0�C for approximately 3 hours. Included inserts adapt wells to hold 0.5 ml microcentrifuge tubes. The polycarbonate cooler body is filled with a non-toxic
|
This Microtiter Plate Holder fits the platform of the Spindrive® Orbital Vibrating and Shaking Platforms. Four Microtiter plates are held securely in place and can be removed easily. Molded of high impact polystyrene, the holder is 26 x 26 x 4.5 cm H (10
|
|
|
|
Spindrive® Rack Adapter
|
|
Incu-Shaker Tube Holder
|
|
Hand Held Electronic Colony Counter
|
|
Colony Counter System
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
This adapter enhances the usefulness of the Spindrive® Orbital and Vibrating Platforms. Fabricated of steel wire with epoxy coating for the chemical resistance, the adapter fits over the platform and holds a No-Wire Half Rack. The rack fits into the
|
Process a wide range of sample sizes needed to move from one part of a procedure to the next. Each tube is angled on the rack
|
In a single motion this colony counter marks, counts and confirms with a beep. The lightweight 42.5 gm (1.2oz) pen-style colony
|
This system combines the pen-style colony counter, the mini-magnifier, the mini light box II with an AC line current adapter and
|
|
|
|
Mini Light Box II
|
|
Mini Magnifier
|
|
Replica-Plating Device
|
|
Velveteen Squares
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
The mini light box offers a color corrected fluorescent viewing surface that is ideal for checking slides, plates, mini-gels, Petri dishes or X-rays. Operates with 4 AA batteries (not included) or with an adapter suitable for both 120V AC and 240V AC
|
This free standing magnifier allows enhanced viewing of slides, petri dishes, multi-well plates, gels or text. The precision molded
|
The Scienceware® Replica Plating Device utilizes a locking ring which secures sterile velveteen squares onto a PVC cylinder for
|
Overcrowded bacterial cell colonies that have developed on a Petri dish can be easily screened and identified with the aid of the Replica-Plating Grid. The Replica-Plating Grid is a flat, white polystyrene plate 34.2 x 38cm (13 1/2 x 15") with 5 wells
|
|
|
|
Replica-Plating Grid
|
|
Sterile Cloning Cylinders
|
|
Sterile Cloning Discs
|
|
Bel-Blotter™ 96-Well Replicating Tool
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Overcrowded bacterial cell colonies that have developed on a Petri dish can be easily screened and identified with the aid of the Replica-Plating Grid. The Replica-Plating Grid is a flat, white polystyrene plate 34.2 x 38cm (13 1/2 x 15") with 5 wells
|
These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder
|
Use these Sterile Cloning Discs to save time and reduce effort when isolating a large number of clones. The sterile paper discs transfer cells quickly and easily to a 24-well plate for growth and eliminate leak problems associated with cloning
|
Designed to do tedious tasks with a minimum of effort, the Bel-Blotter™ Replicator increases productivity. The 96 “open ended” pipette tips in this unique product fit all types of plates from flat, vee or round bottom plates to 0.2ml thin walled PCR
|
|
|
|
Inoculating Turntable
|
|
Plate Reader
|
|
Bacterial Cell Spreaders
|
|
Stackable Pteri Dish Incubation Tray
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Hand-operated turntable produces nearly concentric circles of evenly distributed bacterial colonies. This turntable will accommodate three different sizes of Petri dishes -- 60, 90, 100mm. Made of polypropylene, it has a recessed stabilizing
|
Easy, magnified viewing; hands-free. For microtiter plates, view color changes and locate cells for further analysis. For Petri dishes, view cell growth and take advantage of the hands-free design to make notes and isolate cell colonies. Ideal for
|
Spread your cells onto the surface of an agar plate with this cell spreader. The spreader has a smooth triangular end with a straight spreading bar. Available in two sizes. Both sizes are 302mm (8") long, are autoclavable and may be flame
|
Increase overall capacity of your incubator with the Petri Dish Incubation Trays. Designed to hold five 100mm diameter or fifteen 60mm diameter Petri dishes, each tray is provided with two large label areas for critical sample identification by marker
|
|
|
|
Stak-A-Tray™ System
|
|
Petri Dish Incubator Tray
|
|
Molded contact Plate Rack
|
|
Poxygrid Contact Plate Rack
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Modular rack and tray system maximizes storage of Petri dishes and cell culture flasks in incubators, cold rooms or on the bench. Choose from two types of racks; one supports three levels of trays to hold taller items such as tissue culture flasks,
|
The petri dish incubator tray safely holds 30, 60 or 100mm petri dishes on an incubator rack. Trays keep Cell cultures organized and reduce handling mishaps. Air circulates through 28 holes, each 19mm (3/4") in diameter. Rugged 1.6mm
|
This new rack is very useful for safe transport and incubation of contact plates (RODAC®, Becton Dickinson) and helps to streamline benchtop sample processing. Each rack holds up to 60 contact plates with lids, configured in six columns of ten
|
This epoxy coated steel wire rack holds 100mm x 20mm (4" x 3/4")(nominal size) plastic petri dishes and is easily loaded and emptied from the top. The wide front opening permits easy access but prevents dishes from sliding out. Not suitable for
|
|
|
|
Tissue Culture Flask Racks
|
|
Molded 100mm Petri Dish Rack
|
|
Poxygrid® Petri Dish Carrying Racks
|
|
Poxygrid® Petri Dish Dispensing Racks
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
These polypropylene racks hold 25 cm2 or 75 cm2 (50 - 75 ml or 250 - 260 ml) or similar sized tissue culture flasks in a vertical position during processing of tissue cultures. Rectangular holes in the top and center plates stabilize the flasks. Racks prevent
|
This rack is useful for safe transport and incubation of 100mm Petri dishes and helps to streamline benchtop sample processing. Each rack holds up to forty-two Petri dishes with lids, configured in six columns of seven plates. The base area
|
This epoxy coated steel wire rack holds 100mm x 20mm (4" x 3/4")(nominal size) plastic petri dishes and is easily loaded and emptied from the top. The wide front opening permits easy access but prevents dishes from sliding out. Not suitable for
|
Petri dishes are easily dispensed one at a time from the bottom of the stack with these epoxy coated steel wire racks. Each channel holds fourteen 100mm x 20mm (nominal size) plastic petri dishes (4" x 3/4") which are loaded at the top and
|
|
|
|
Easyplate™ Petri Dish Racks - 4 Colors
|
|
Easyplate™ Turntable
|
|
100mm Petri Dish Rack
|
|
Gel Staining Boxes - 2 Types
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Increase workspace and efficiently transport Petri dishes with the Easyplate. The Easyplate eliminates a "balancing act" of Petri dishes and enables you to transport Petri dishes rapidly and orderly. Elastic holding devices keep the Petri dishes in
|
Using the Easyplate™ Turntable the researcher or technician can rotate the Easyplate™ Petri Dish Rack 360º for fast, easy accessibility. The turntable revolves smoothly on ball bearings, allowing the user to quickly remove or replace a Petri dish on
|
Use this acrylic rack to hold up to fifty-four 100mm Petri dishes in organized stacks of 9 dishes. Dishes can be removed with one hand and are easily viewed through the clear base and divider. The divider has a built in finger grip handle for
|
Electrophoresis gels and membranes can be easily stained, fixed, destained and handled in these boxes supplied with snap fit lids. The boxes have a drain (with LDPE plug) lower than the floor of the box to minimize disturbance of the gel
|
|
|
|
Gel Destaining Bag
|
|
Gel Binder
|
|
Leveling Table
|
|
Electrophoresis Gel Plate Rack
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
The Scienceware® Destaining Bags accelerate the process of destaining by absorbing the stain as it leaches from the gel. Following destaining, the bags can be discarded in the trash and the destaining solution reused. The Destaining Bags are
|
This sturdy, vinyl covered 10-ring loose leaf binder stores and protects 36 x 43cm (14" x 17") film in transparent sheet protector that provide easy viewing. X-ray films are placed two per sheet. 10 sheets protectors are supplied, replacements
|
This clear acrylic level surface helps in pouring immunological plates and horizontal agarose gels. Each leg is adjustable, and an inset leveling bulb below the working surface assists in accurate adjustment. The rigid platform is 203 x 203 x 9.5mm
|
The Scienceware® Electrophoresis Gel Plate Rack has 10 places for holding glass plates and a weighted base for safety. Wide handles provide a secure grip while transporting the rack, filled with plates, from the bench to the sink. Smooth
|
|
|
|
Electrophoresis Gel Plate Drying Rack
|
|
Electophoresis Fixing Tray - 2 Sizes
|
|
Autoradiography Pens - 2 Types
|
|
Radiography Glo-Stickers Kit
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
A sturdy, A-shaped rack that holds glass electrophoresis plates vertically for quick drying and convenient access, including three slots for large and double plates. All slots have soft plastic supports on each side to cushion plates and rubber pads on the
|
These fixing trays allow the user to drain the fixing solution and then place filter paper on top of the gel while it rests in the tray. In addition, the solution is recoverable for subsequent reuse. The trays are also useful in electrophoresis gel de-
|
Excellent for marking various substrates that are to be radiographed with run numbers, dates and exposure times, film alignment markings, etc. They incorporate a non-toxic phosphorescent material that will not leak or dry out, have no
|
For use in all radiography applications that require a permanent impression to be made on X-ray film. The Glo-Sticker Kit is a set of self-adhesive labels that allow the user to mark X-ray film for alignment, identification, date, name of
|
|
|
