|
Drying/Draining Rack
|
|
PrepSafe™ Floating Microcentrifuge Tube Rack
|
|
Scienceware Adjustable Elution Rack
|
|
Scienceware Rack Slanter
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
The plastic draining rack provides an excellent option for post wash draining of tubes and bottles. The back plate has 20 holes into which pegs are tightened
|
Protect your samples. Hold 1.5ml and 2.0ml microcentrifuge tubes securely in a water bath or on the benchtop, even if tipped over. Immobilizing tabs allow
|
Perform as many as 42 elutions in one rack, saving valuable bench space. Eliminate the need for multiple support rods and stands with this rack that simultaneously
|
Scienceware® Rack Slanter - Tilt your test tube rack to 25°, 35° or 45°. Adjusting the angle of racks reduces hand strain when working with pipettors.
|
|
|
|
Poxygrid® 500ml Conical Centrifuge Tube Rack
|
|
Magic Touch Icewares Round Floating Racks (44 Place Rouch Rack)
|
|
Magic Touch Icewares Round Floating Racks (30 Place Rouch Rack)
|
|
Magic Touch Rectangular Floating Racks (36 Places)
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
The only rack that can support up to four (4) 500ml conical bottom centrifuge tubes that cannot stand upright by themselves. 203mm x 203mm x 76mm
|
Floats in water, dry ice/alcohol slurries and liquid nitrogen, 44 places, Fits all Magic Touch Ice Buckets, 21cm diameter x 1cmH
|
Floats in water, dry ice/alcohol slurries and liquid nitrogen, 44 places, Fits all Magic Touch Ice Buckets, 21cm diameter x 1cmH
|
Floats in water, dry ice/alcohol slurries and liquid nitrogen, 36 places, Fits Magic Touch Ice Pans - Midi, 1 rack; Maxi up to 3 racks, 23.5 x 10.8 x 1cmH
|
|
|
|
Magic Touch Rectangular Floating Racks (24 Places)
|
|
Separatory Funnel Rack
|
|
Stackable Pteri Dish Incubation Tray
|
|
Petri Dish Incubator Tray
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
Floats in water, dry ice/alcohol slurries and liquid nitrogen, 24 places, Fits Magic Touch Ice Pans - Midi, 1 rack; Maxi up to 3 racks, 23.5 x 10.8 x 1.58cmH
|
This high-density polyethylene rack holds four separatory funnels up to 98mm (3-7/8 ") in diameter on its center shelf. Four beakers fit on the bottom shelf and
|
Increase overall capacity of your incubator with the Petri Dish Incubation Trays. Designed to hold five 100mm diameter or fifteen 60mm diameter Petri dishes, each tray is provided with two large label areas for critical sample identification by marker
|
The petri dish incubator tray safely holds 30, 60 or 100mm petri dishes on an incubator rack. Trays keep Cell cultures organized and reduce handling mishaps. Air circulates through 28 holes, each 19mm (3/4") in diameter. Rugged 1.6mm
|
|
|
|
Molded contact Plate Rack
|
|
Tissue Culture Flask Racks
|
|
Poxygrid® Petri Dish Dispensing Racks
|
|
Easyplate™ Petri Dish Racks - 4 Colors
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
This new rack is very useful for safe transport and incubation of contact plates (RODAC®, Becton Dickinson) and helps to streamline benchtop sample processing. Each rack holds up to 60 contact plates with lids, configured in six columns of ten
|
These polypropylene racks hold 25 cm2 or 75 cm2 (50 - 75 ml or 250 - 260 ml) or similar sized tissue culture flasks in a vertical position during processing of tissue cultures. Rectangular holes in the top and center plates stabilize the flasks. Racks prevent
|
Petri dishes are easily dispensed one at a time from the bottom of the stack with these epoxy coated steel wire racks. Each channel holds fourteen 100mm x 20mm (nominal size) plastic petri dishes (4" x 3/4") which are loaded at the top and
|
Increase workspace and efficiently transport Petri dishes with the Easyplate. The Easyplate eliminates a "balancing act" of Petri dishes and enables you to transport Petri dishes rapidly and orderly. Elastic holding devices keep the Petri dishes in
|
|
|
|
100mm Petri Dish Rack
|
|
Negative 20°C Cryo-Safe™ Mini Cooler
|
|
Negative 20°C Cryo-Safe™ Maxi Cooler
|
|
Cryo-Safe™ Mini Quick-Freeze Cooler
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
Use this acrylic rack to hold up to fifty-four 100mm Petri dishes in organized stacks of 9 dishes. Dishes can be removed with one hand and are easily viewed through the clear base and divider. The divider has a built in finger grip handle for
|
This small cooler safely holds twelve 0.5 to 2.0 ml microcentrifuge tubes or cryogenic vials at a temperature below -15°C for approximately 1 hour. Included inserts adapt wells to hold 0.5 ml microcentrifuge tubes. The polycarbonate
|
This cooler safely holds thirty-two 0.5 to 2.0 ml microcentrifuge tubes or cryogenic vials at a temperature below -15°C for approximately 11/2 hours. Included inserts adapt wells to hold 0.5 ml microcentrifuge tubes. The polycarbonate cooler body is
|
The cooler can be used repeatedly for up to 45 minutes to rapidly and repeatedly chill biological samples for use in molecular biology. Applications such as ethanol precipitation of DNA/RNA samples are made easy, eliminating the
|
|
|
|
Cryo-Safe™ Cold Box
|
|
Pipette Support Rack
|
|
Rotary Pipette Stand
|
|
Pipette Support Stand
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
The Cryo-Safe™ Cold Box provides a convenient means of preventing expensive enzymes and critical samples from warming. This handy unit consists of a molded polystyrene container with cover. It has an internal 12 place support for 1.5
|
For orderly, space-saving pipette storage. These sturdy racks holds 50 pipettes in a vertical 5 x10 arrangement. Top and middle decks have
|
This unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of the pipette you want. The lower
|
For safe and orderly storage of up to 28 pipettes, this polypropylene stand holds pipettes in a vertical position. The top plate has two
|
|
|
|
Pipette Tray Rack
|
|
Poxygrid® Pasteur Pipette Rack
|
|
Pipettor Stand-6™ Rack
|
|
PiRack™ Pipettor Holder System - 3 Sizes
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
For soaking, draining or storing pipettes. This styrene tray is useful in lab drawers or on a benchtop. Scalloped rims hold 16 small or 7 large
|
The Scienceware® Poxygrid® Pasteur Pipette Rack is designed specifically for the safe, convenient storage of these disposables which are used
|
Keep up to 6 pipettors at hand with these holders. Cutouts on 2 shelves hold and support the most popular pipettor models. Available in
|
The sturdy PiRack™ Clamp-On Pipettor Holder supports many standard brands of pipettors and keeps them safe and within easy reach. Simply
|
|
|
|
No-Wire™ Autoclavable Test Tube Racks - 5 Sizes
|
|
No-Wire™ Multi-Tube Racks - 2 Sizes
|
|
No-Wire™ Grip Racks - 3 Sizes
|
|
No-Wire™ Round Racks - 3 Sizes
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
A great alternative to wire racks, with price and space saving advantages over other plastic racks currently available. These submersible
|
A single No-Wire™ Rack holds three different sizes of round or conical bottom centrifuge tubes. Holds four 50ml, seven 15ml and
|
The No-Wire™ Grip Racks are great for both decanting and in water bath work. Four retainer fingers in the two plates of the rack
|
No-Wire™ Round Racks fit neatly into round containers such as ice buckets, desiccators and beakers. Two sizes are available: a large rack
|
|
|
|
Heavy Duty Test Tube Racks - 5 Sizes
|
|
Radioimmunoassay Tube Racks - 3 Sizes
|
|
No-Wire™ Autoclavable Half Racks - 5 Sizes
|
|
In-Line Test Tube Rack
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
|
|
|
|
|
These heavy-duty 3 tier racks are molded of polypropylene for general lab use. They are stackable, compact, and steam autoclavable
|
These racks provide a practical method of pipetting and storing a large number of samples. By using alternate rows and rotating
|
No-Wire™ Half Racks save both water bath and fume hood space. The polypropylene racks are available in 5 sizes to accommodate the full
|
For high-visibility, this 6-place rack is end-supported by two columns. The top plate has 25mm diameter holes and the base has corresponding
|
|
|
|
Poxygrid® Hybridization Bottle Rack
|
|
Serum Vial Racks - 3 Sizes
|
|
Scintillation Vial Rack
|
|
Poxygrid® 50ml Centrifuge Tube Holder
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 7 to 10 Business Days*
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Heavy-duty racks protect your expensive bottles in individual wells which prevent rolling, tipping and striking against one another. They hold 150mm
|
Just the right size for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Long-lasting
|
This rugged and stable rack holds 24 scintillation vials (30mm diameter) for convenient storage, handling, and sample preparation. Made of
|
This holder solves the problem of where to put a single 50ml conical tube where it will not roll or spill. The holder is formed of
|
|
|
