|
Safe-Lab Solid Teflon PTFE Stoppers - 3 Sizes
|
|
Safe-Lab Teflon PTFE Stoppers - 8 Sizes
|
|
Safe-Lab Hollow Teflon PTFE Stoppers - 5 Sizes
|
|
Safe-Lab Glass Stoppers - 3 Sizes
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Solid Teflon� stopper with extracting nut for flasks with ground joints
|
Solid Teflon® TFE stopper with threaded polypropylene extracting nut for easy removal of stopper from flask. Interchangeable with penny head stoppers.
|
Use these hollow Teflon® stoppers for boiling and distilling style flasks with ground joints. Stopper comes with polypropylene extracting nut for easy removal from flask.
|
Lightweight hollow borosilicate glass stopper. Flat hex head for easy gripping. SAF-T-LINE® threaded polymethylpentene extracting nut above ground surface allows easy and safe removal of stopper from flask.
|
|
|
|
Adapt-A-Port Stopper Kits, Teflon PTFE - 2 Sizes
|
|
Safe-Lab Adapt-A-Port Body - 2 Sizes
|
|
Safe-Lab Therm-O-Vac Joint Adapter
|
|
Safe-Lab Therm-O-Vac port Adapter
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
The Safe-Lab® Adapt-a-Port® Kit is a unique adapter set consisting of three TEFLON® TFE pieces. The TEFLON® TFE body is
|
Teflon® PTFE Adapt-A-Port® body threaded on top to accept the Scienceware® threaded port adapters. Comes with polypropylene extracting nut. Not autoclavable.
|
Teflon® adapter with Viton® O-ring on the body, screw cap and hose connection.
|
Threaded Therm-O-Vac® Port Adapter with serrated side Teflon® TFE nozzle. For use with Scienceware® Adapt-A-Port® Teflon® body. Not autoclavable.
|
|
|
|
Safe-Lab Thermometer Joint Adapters - 4 Sizes
|
|
Safe-Lab Joint Tubing Adapters - 2 Sizes
|
|
Safe-Lab Stirrer Bearings - 2 Sizes
|
|
Stopper-Loc Nut
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Teflon® body with Viton® O-ring for air tight vacuum work. The adapter has a threaded polypropylene screw cap on top with an
|
Teflon® body with Viton® O-ring. Polypropylene screw cap on top with inside O-ring for depth adjustment of glass tubing. Bottom
|
SAF-T-LINE® threaded size for use with Stopper-Loc® Nut. Allows stirrer bearing to be locked to outer ground joint when stirring
|
A dual-action device that locks and unlocks threaded products to and from outer ground joints. Autoclavable polypropylene nut fits
|
|
|
|
Safe-Lab Joint Vacuum Adapters - 3 Sizes
|
|
Safe-Lab Joint Stirrer Bearing
|
|
Safe-Lab Teflon PTFE Bearing Inserts
|
|
Cup Type Stoppers - 7 Sizes
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Teflon® PTFE body with Viton® O-ring. Teflon® hose connection for vacuum work or inlet/outlet of gases. Rotate SAF-T-LINE®
|
Teflon® PTFE body with Viton® O-ring for use with 10 mm stirring rods. Teflon® insert has inside O-ring for fine adjustment of stirring
|
Replacement Teflon® inserts with Viton® O-ring for 10 mm Teflon® stirrer bearings. Two inserts per pack.
|
These polyethylene cup-type stoppers fit tightly, yet remove easily. All are 25mm high.
|
|
|
|
Flaskup Flask Holders - 6 Sizes
|
|
|
|
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
Unique flask holders are molded from glass filled polypropylene, and are durable as well as easy to clean. The inside wall has
|
|
|
