|
Small Bore Teflon PTFE Tubing - 4 Sizes
|
|
Plastic Tubing Cutter
|
|
Metric Diameter Guage Tubing Sizer
|
|
Tubing Holder
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Also available in larger sizes. Minimum cut 25 ft.
|
The portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (1/16" to 3/4") O.D. The jaw is lightly spring-loaded
|
A handy metric diameter gauge that will end doubt about inside or outside diameters. The gauge measures glass and plastic tubing,
|
Hold flexible tubing steady in beakers or pitchers with this polycarbonate clip. It fits securely onto the edge and has a 51mm (2")
|
|
|
|
Tubing Sinkers PTFE - 2 Sizes
|
|
Stat-O-Lok Disconnects - 2 Sizes
|
|
Faucets - 3 Sizes
|
|
Complete Fitting Assortment
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Teflon® sinkers keep tubing at the bottom of your container. Ideal for use with pumps and dispensers, these sinkers have hose
|
Quick-disconnect in-line tubing connectors. Use Stat-O-Lok™ connecters for one hand, no mess tubing hook-ups. These chrome plated
|
Same 12.7mm bore (1/2") needle type, polyethylene faucet with same Teflon® O-ring, but with the addition of a male threaded outlet.
|
Stop wasting time hunting for the right tubing connection. This generous assortment of 76 fittings has everything you need for
|
|
|
|
Stepped Tubing Connectors - 6 Sizes
|
|
Straight Connectors - 5 Sizes
|
|
Quick Disconnects - 3 Sizes
|
|
Quick Disconnects - 4 Sizes
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Autoclavable, polypropylene.
|
Autoclavable, polypropylene.
|
Full range of sizes to fit tubing from 3 to 12mm (1/8" to 1/2") I.D. Consists of two serrated polyethylene connectors which assemble
|
Polyethylene connectors are ideal for vacuum applications, water lines, manometers, etc.
|
|
|
|
Check Valves - 2 Sizes
|
|
"5 in 1" Connectors - 2 Types
|
|
"Y" Connectors - 6 Sizes
|
|
"T" Connectors3 Sizes
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
These polyethylene check valves operate positively and instantly in any position. Arrows indicate direction of free flow. Neoprene disk, no metal.
|
The "five-in-one" fits 5 sizes of tubing and will connect the same size tubing on both ends or act as a reducer for any combination within
|
Autoclavable, polypropylene.
|
Autoclavable, polypropylene.
|
|
|
|
Check Valves - 3 Sizes
|
|
Needle Valve
|
|
Stopcocks - 4 Sizes
|
|
Stopcocks - 2 sizes
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
|
Useful when connecting a vacuum line to a filter flask. Polypropylene valve with neoprene valve disk. Recommended maximum
|
Precise flow. Teflon PTFE needle valve is ideal for use with corrosives, because fluids come into contact with only glass and Teflon.
|
With a removable leak proof plug made of chemical-resistant, non-stick Teflon® TFE, these polypropylene stopcocks have serrated
|
Two piece molded polyethylene stopcock. Parts snap together forming a tight seal and the free-turning key needs no lubrication. A quarter turn shuts off flow. Maximum pressure rating 48 kPa (7 psi), 50 cm of water.
|
|
|
|
Stopcocks - 3 Sizes
|
|
Bobbit Valve
|
|
Connector Assortment
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
Usually Ships in 3 to 5 Business Days
|
|
|
|
|
|
|
PVDF (polyvinylidene fluoride) is a fluoroplastic resistant to most chemicals and withstands temperatures up to 204°C (400°F). Serrated
|
Insert the Pinch Valve (identical in function to the Bobbit Valve) into any tubing and easily control fluid flow without drips. Squeeze and hold
|
An assortment of polypropylene straight and straight-stepped tubing connectors.
|
|
|
